The Amstaff TP019W Folding Wall Mount Squat Rack is unlike anything else in the market. The unit functions like a standard Power / Squat rack when set up--complete with a pair of 2.5” x 2.5” 11-gauge steel uprights, Westside hole spacing through the bench/rack pull zone, and 2”- on-center spacing above and below. With the unique hinge and pin system, though, you have the ability to quickly remove the pull-up bar after a workout, then fold the sides of the rack back against the wall to open up a massive amount of space.
When stowed away, the Folding Wall Mount Squat Rack takes up less than 5” of space from the wall, meaning you can have a world class power rack in your garage without having to park your car on the street at night.
Features:
- Fully Retractable Power / Squat Rack
- Uprights: 2.5” x 2.5” 11-gauge steel
- Dimensions when unfolded: 90"H x 46"W x 22"D
- Dimensions when folded: 90"H x 46"W x 4"D
- J-Hooks are included
- 1” Holes spaced 2” apart (centre to centre).
- Olympic Bars, Weight Plates, Collars and Wall mounting hardware are not included.
*Important:
- A 2” x 10” stringer (not included) must be tied into a minimum of 4 studs.
- It is NOT recommend installing the Fold Back Rack on a wood, drywall, or metal stud wall without a stringer or additional support.
The Amstaff TP019W Folding Wall Mount Squat Rack is unlike anything else in the market. The unit functions like a standard Power / Squat rack when set up--complete with a pair of 2.5” x 2.5” 11-gauge steel uprights, Westside hole spacing through the bench/rack pull zone, and 2”- on-center spacing above and below. With the unique hinge and pin system, though, you have the ability to quickly remove the pull-up bar after a workout, then fold the sides of the rack back against the wall to open up a massive amount of space.
When stowed away, the Folding Wall Mount Squat Rack takes up less than 5” of space from the wall, meaning you can have a world class power rack in your garage without having to park your car on the street at night.
Features:
- Fully Retractable Power / Squat Rack
- Uprights: 2.5” x 2.5” 11-gauge steel
- Dimensions when unfolded: 90"H x 46"W x 22"D
- Dimensions when folded: 90"H x 46"W x 4"D
- J-Hooks are included
- 1” Holes spaced 2” apart (centre to centre).
- Olympic Bars, Weight Plates, Collars and Wall mounting hardware are not included.
*Important:
- A 2” x 10” stringer (not included) must be tied into a minimum of 4 studs.
- It is NOT recommend installing the Fold Back Rack on a wood, drywall, or metal stud wall without a stringer or additional support.